Brass angle ball valve, DVGW, R 1/2" / Rp 1/2", -0.9 to 40 bar

This item shuts off the flow in the line with a quarter turn and is listed as a brass angle ball valve. The data sheet states G (male thread) R 1/2" as well as G (female thread) Rp 1/2". The stated material is nickel-plated brass. For the seals the data gives PTFE / NBR.

Benefits

• full bore in the open position and therefore low pressure loss, verified by G (male thread) R 1/2"
• G (female thread) Rp 1/2"
• pressure rating PN -0.9 to 40 bar
• material nickel-plated brass as stated in the data
• sealing material PTFE / NBR
• made to DVGW

Applications

This design is used for pipework, compressed air networks and plant construction. For the media the data sheet gives flüssige and gasförmige, neutrale Medien, gases nach DVGW Arbeitsblatt, vacuum.

Standards and conformity

The article complies with DVGW.