Brass ball valve, Rp 1/2", -0.9 to 50 bar, full bore, seals PTFE /, 49

In daily operation this item shuts off the flow in the line with a quarter turn, and it is supplied as a brass ball valve. The recorded ratings are thread G Rp 1/2" and version standard. The material is nickel-plated brass. For the seals the data gives PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G Rp 1/2"
• pressure rating PN -0.9 to 50 bar
• material nickel-plated brass as stated in the data
• sealing material PTFE
• temperature range -20 to +150 °C
• made to DIN 3202

Applications

In service the version is found in pipework, compressed air networks and plant construction. For the media the data sheet gives water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum.

Standards and conformity

Manufacture follows DIN 3202.