Brass ball valve, R 1/4" / Rp 1/4", -0.9 to 50 bar, seals PTFE

Listed as a brass ball valve, this version shuts off the flow in the line with a quarter turn. Decisive here are G1 (male thread) R 1/4" and G2 (female thread) Rp 1/4". The material is nickel-plated brass. For the seals the data gives PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by G1 (male thread) R 1/4"
• G2 (female thread) Rp 1/4"
• pressure rating PN -0.9 to 50 bar
• material nickel-plated brass as stated in the data
• sealing material PTFE
• temperature range -20 to +150 °C

Applications

In service the version is found in pipework, compressed air networks and plant construction. For the media the data sheet gives water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum.