Brass ball valve, R 1/2" / Rp 1/2", -0.9 to 50 bar, T-handle, DN 15

Supplied as a brass ball valve, this item shuts off the flow in the line with a quarter turn. The defining values are version T-handle and G1 (male thread) R 1/2". The stated material is nickel-plated brass. Sealing is handled by PTFE / NBR.

Benefits

• full bore in the open position and therefore low pressure loss, verified by version T-handle
• material nickel-plated brass as stated in the data
• sealing material PTFE / NBR
• pressure rating PN -0.9 to 50 bar
• G1 (male thread) R 1/2"
• G2 (female thread) Rp 1/2"

Applications

The article is used in pipework, compressed air networks and plant construction. The listed media are water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum.