Brass ball valve with vent hole G 3/8", PN 14, DN 10, seals PTFE

When used as a brass ball valve with vent hole, the article shuts off the flow in the line with a quarter turn. The article is listed with thread G 3/8" and pressure rating PN -0.98 to 14 bar. The material is nickel-plated brass. The seals are made of PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G 3/8"
• pressure rating PN -0.98 to 14 bar
• material nickel-plated brass as stated in the data
• sealing material PTFE
• temperature range -10 to +100 °C
• vent thread M 5

Applications

The article is called for in pipework, compressed air networks and plant construction. The listed media are air, water, vacuum.