Brass ball valve, G 1-1/2" (male thread), -0.9 to 30 bar, standard

Listed as a brass ball valve, this version shuts off the flow in the line with a quarter turn. This version carries thread G 1-1/2" at version standard. The material specified is nickel-plated brass. The seals are made of PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G 1-1/2"
• material nickel-plated brass as stated in the data
• sealing material PTFE
• temperature range -10 to +95 °C
• version standard
• pressure rating PN -0.9 to 30 bar

Applications

It finds its place in pipework, compressed air networks and plant construction. The listed media are water, neutral gaseous and non-aggressive liquid media, mineral oils, fuels, compressed air, vacuum.