Brass ball valve, DVGW, Rp 3/8", -0.9 to 50 bar, DN 10, seals PTFE /, 24

In daily operation this item shuts off the flow in the line with a quarter turn, and it is supplied as a brass ball valve. The recorded ratings are thread G Rp 3/8" and version T-handle. The material is nickel-plated brass. For the seals the data gives PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G Rp 3/8"
• pressure rating PN -0.9 to 50 bar
• material nickel-plated brass as stated in the data
• sealing material PTFE
• temperature range -20 to +150 °C
• made to DVGW

Applications

In service the version is found in pipework, compressed air networks and plant construction. For the media the data sheet gives water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum, gases nach DVGW Arbeitsblatt.

Standards and conformity

Manufacture follows DVGW and DIN 3202.