Brass ball valve, DVGW, Rp 3/8", -0.9 to 50 bar, DN 10, seals PTFE /, 80

When used as a brass ball valve, the article shuts off the flow in the line with a quarter turn. The article is listed with thread G Rp 3/8" and version standard. The material is nickel-plated brass. The seals are made of PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G Rp 3/8"
• made to DIN 3202
• version standard
• pressure rating PN -0.9 to 50 bar
• material nickel-plated brass as stated in the data
• sealing material PTFE

Applications

The article is called for in pipework, compressed air networks and plant construction. The listed media are water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum, gases nach DVGW Arbeitsblatt.

Standards and conformity

The stated standard is DVGW and DIN 3202.