Brass ball valve, DVGW, Rp 1/2", -0.9 to 50 bar, thread G Rp 1/2", 44

Installed in the line, this brass ball valve shuts off the flow in the line with a quarter turn. Selection is based on thread G Rp 1/2" and version T-handle. It is manufactured from nickel-plated brass. The stated sealing material is PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G Rp 1/2"
• version T-handle
• pressure rating PN -0.9 to 50 bar
• material nickel-plated brass as stated in the data
• sealing material PTFE
• temperature range -20 to +150 °C

Applications

The article is used in pipework, compressed air networks and plant construction. According to the data sheet water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum, gases nach DVGW Arbeitsblatt are approved.

Standards and conformity

The data sheet refers to DVGW and DIN 3202.