Brass ball valve, DVGW, R 1/2" / Rp 1/2", -0.9 to 50 bar, DN 15, 44

Installed in the line, this brass ball valve shuts off the flow in the line with a quarter turn. Selection is based on G1 (male thread) R 1/2" and G2 (female thread) Rp 1/2". It is manufactured from nickel-plated brass. The stated sealing material is PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by G1 (male thread) R 1/2"
• version T-handle
• G2 (female thread) Rp 1/2"
• pressure rating PN -0.9 to 50 bar
• material nickel-plated brass as stated in the data
• sealing material PTFE

Applications

The article is used in pipework, compressed air networks and plant construction. According to the data sheet water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum, gases nach DVGW Arbeitsblatt are approved.

Standards and conformity

The data sheet refers to DVGW.