Brass ball valve, DVGW, R 1/2" / Rp 1/2", -0.9 to 50 bar, DN 15, 49

The brass ball valve version shuts off the flow in the line with a quarter turn. Key figures are G1 (male thread) R 1/2" together with G2 (female thread) Rp 1/2". The stated material is nickel-plated brass. Sealing is handled by PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by G1 (male thread) R 1/2"
• version standard
• G2 (female thread) Rp 1/2"
• pressure rating PN -0.9 to 50 bar
• material nickel-plated brass as stated in the data
• sealing material PTFE

Applications

Its place is in pipework, compressed air networks and plant construction. The media specification covers water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum, gases nach DVGW Arbeitsblatt.

Standards and conformity

The design is based on DVGW.