Brass ball valve, direct mounting flange G 3/4", -0.9 to 40 bar, nominal size DN 20 mm

Installed in the line, this brass ball valve shuts off the flow in the line with a quarter turn. Selection is based on thread G 3/4" and direct mounting flange to ISO 5211 F03. It is manufactured from nickel-plated brass. The stated sealing material is PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G 3/4"
• pressure rating PN -0.9 to 40 bar
• direct mounting flange to ISO 5211 F03
• material nickel-plated brass as stated in the data
• sealing material PTFE
• temperature range -20 to +120 °C

Applications

The article is used in pipework, compressed air networks and plant construction. According to the data sheet water, compressed air, vacuum, oils, fuels, heating oil, solvents, weak acids and alkalis are approved.

Standards and conformity

The data sheet refers to ISO 5211.