Brass ball valve, direct mounting flange G 3/4", -0.9 to 40 bar

Installed in the line, this brass ball valve shuts off the flow in the line with a quarter turn. The recorded ratings are thread G 3/4" and temperature range -20 to +160 °C. The stated material is nickel-plated brass. The seals are made of PTFE / FKM.

Benefits

• direct mounting flange to ISO 5211 F03
• full bore in the open position and therefore low pressure loss, verified by thread G 3/4"
• material nickel-plated brass as stated in the data
• sealing material PTFE / FKM
• made to ISO 5211
• pressure rating PN -0.9 to 40 bar

Applications

The article is called for in pipework, compressed air networks and plant construction. According to the data sheet water, compressed air, vacuum, oils, fuels, heating oil, solvents, weak acids and alkalis are approved.

Standards and conformity

The stated standard is ISO 5211 and DVGW.