Brass ball valve, Direktmontageflansch G 1/2", -0.9 to 40 bar

When used as a brass ball valve, the article shuts off the flow in the line with a quarter turn. The article is listed with thread G 1/2" and direct mounting flange to ISO 5211 F03. The material is nickel-plated brass. The seals are made of PTFE / FKM.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G 1/2"
• made to DIN 3202
• pressure rating PN -0.9 to 40 bar
• direct mounting flange to ISO 5211 F03
• temperature range -20 to +160 °C
• material nickel-plated brass as stated in the data

Applications

The article is called for in pipework, compressed air networks and plant construction. The listed media are water, compressed air, vacuum, oils, fuels, heating oil, solvents, weak acids and alkalis.

Standards and conformity

The stated standard is DVGW and DIN 3202.