Brass ball outlet cock G 1"-25 (1")mm, -0.9 to 12 bar, seals PTFE

Installed in the line, this brass ball outlet cock shuts off the flow in the line with a quarter turn. Selection is based on hose diameter (inside) 25 (1") mm and pressure rating PN -0.9 to 12 bar. It is manufactured from nickel-plated brass. The stated sealing material is PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by hose diameter (inside) 25 (1") mm
• G1 G 1"
• G2 G 1-1/4"
• pressure rating PN -0.9 to 12 bar
• material nickel-plated brass as stated in the data
• sealing material PTFE

Applications

The article is used in pipework, compressed air networks and plant construction. According to the data sheet water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum are approved.