Loosening tool, quick-connect fittings - Riegler K2717

Loosening tool, quick-connect fittings. This range covers 2 variants from 1.44 EUR. Select the version you need above.

Available variants

Shared technical data

About Removal tool

The release tool pushes back the collet of a push-in fitting so the tube can be pulled out without damage. The two versions cover hose outside diameters from 3 to 10 mm and from 4 to 14 mm.

What matters when choosing

• Hose outside diameter: the smaller version works from 3 to 10 mm, the larger one from 4 to 14 mm. Choose by the largest diameter present in the plant.
• The two ranges overlap between 4 and 10 mm, so a single larger tool often covers both.
• The group contains 2 tools. With a mixed stock of tubing it pays to carry both in the service case.
• The price difference between the two versions is small, so the covered diameter range usually decides rather than cost.

Typical applications

• Removing push-in fittings during maintenance of pneumatic systems
• Rebuilding and extending machine tubing
• Releasing tubes at fittings that are hard to reach inside a control cabinet
• Repair of control air lines where the tubing is reused
• Standard item in the field service tool case

The group contains 2 versions that together cover hose outside diameters from 3 to 14 mm. Manufacturing takes place in Italy (IT).