Button head screw with flange ISO 7380-2, M 6 x 45 mm, stainless steel A2

As a button head screw with flange the article joins components through its hexagon socket and takes support on the workpiece over the flange. The data sheet gives the thread size M 6. This version is listed with thread M 6, a length of 45 mm, a head diameter of 13.6 mm and a head height of 3.30 mm. Material stainless steel A2 is listed for this version.

Benefits

• Thread M 6 to ISO 7380-2 at a length of 45 mm.
• The flange with its head diameter of 13.6 mm spreads the clamping force over a larger area and makes a washer unnecessary.
• A head height of 3.30 mm keeps the head flat above the surface of the component.
• The 4 mm hexagon socket transfers the tightening torque without an exposed screwdriver slot.
• Thread up to close to the head, dimensions to ISO 7380-2.
• Made of stainless steel A2.

Applications

In jig construction the M 6 screw joins sheets and profiles wherever the 13.6 mm flange enlarges the bearing surface.

Standards and conformity

Head diameter 13.6 mm, head height 3.30 mm and hexagon socket 4 mm follow ISO 7380-2.