Button head screw with flange ISO 7380-2, M 6 x 16 mm, stainless steel A2

This button head screw with flange joins components through its hexagon socket and takes support on the workpiece over the flange. The data sheet gives the thread size M 6. This version is listed with thread M 6, a length of 16 mm, a head diameter of 13.6 mm and a head height of 3.30 mm. The stated material is stainless steel A2.

Benefits

• Thread M 6 to ISO 7380-2 at a length of 16 mm.
• The flange with its head diameter of 13.6 mm spreads the clamping force over a larger area and makes a washer unnecessary.
• A head height of 3.30 mm keeps the head flat above the surface of the component.
• The 4 mm hexagon socket transfers the tightening torque without an exposed screwdriver slot.
• Thread up to close to the head, dimensions to ISO 7380-2.
• Made of stainless steel A2.

Applications

In jig construction the M 6 screw joins sheets and profiles wherever the 13.6 mm flange enlarges the bearing surface.

Standards and conformity

Head diameter 13.6 mm, head height 3.30 mm and hexagon socket 4 mm follow ISO 7380-2.