Button head screw with flange ISO 7380-2, M 12 x 60 mm, zinc-plated steel 10.9

This button head screw with flange to ISO 7380-2 joins components through its hexagon socket and takes support on the workpiece over the flange. This version comes with thread M 12, a length of 60 mm, a head diameter of 26.0 mm and a head height of 6.60 mm. A further figure is a hexagon socket of 8 mm across flats.

Benefits

• Thread M 12 to ISO 7380-2 at a length of 60 mm.
• The flange with its head diameter of 26.0 mm spreads the clamping force over a larger area and makes a washer unnecessary.
• A head height of 6.60 mm keeps the head flat above the surface of the component.
• The 8 mm hexagon socket transfers the tightening torque without an exposed screwdriver slot.
• Partial thread with at least 36 mm of thread, dimensions to ISO 7380-2.
• Made of zinc-plated steel 10.9.

Applications

In machine building the M 12 x 60 mm screw holds components that are to be joined without a washer.

Standards and conformity

Head diameter 26.0 mm, head height 6.60 mm and hexagon socket 8 mm follow ISO 7380-2.