Button head screw with flange ISO 7380-2, M 10 x 25 mm, zinc-plated steel 10.9

As a button head screw with flange the article joins components through its hexagon socket and takes support on the workpiece over the flange. The data sheet gives the thread size M 10. This version is listed with thread M 10, a length of 25 mm, a head diameter of 21.9 mm and a head height of 5.50 mm. Material zinc-plated steel 10.9 is listed for this version.

Benefits

• Thread M 10 to ISO 7380-2 at a length of 25 mm.
• The flange with its head diameter of 21.9 mm spreads the clamping force over a larger area and makes a washer unnecessary.
• A head height of 5.50 mm keeps the head flat above the surface of the component.
• The 6 mm hexagon socket transfers the tightening torque without an exposed screwdriver slot.
• Thread up to close to the head, dimensions to ISO 7380-2.
• Made of zinc-plated steel 10.9.

Applications

In jig construction the M 10 screw joins sheets and profiles wherever the 21.9 mm flange enlarges the bearing surface.

Standards and conformity

Head diameter 21.9 mm, head height 5.50 mm and hexagon socket 6 mm follow ISO 7380-2.