Button head screw with flange ISO 7380-2, M 10 x 20 mm, plain black steel 10.9

The button head screw with flange joins components through its hexagon socket and takes support on the workpiece over the flange and follows ISO 7380-2. This version comes with thread M 10, a length of 20 mm, a head diameter of 21.9 mm and a head height of 5.50 mm. It is complemented by a hexagon socket of 6 mm across flats.

Benefits

• Thread M 10 to ISO 7380-2 at a length of 20 mm.
• The flange with its head diameter of 21.9 mm spreads the clamping force over a larger area and makes a washer unnecessary.
• A head height of 5.50 mm keeps the head flat above the surface of the component.
• The 6 mm hexagon socket transfers the tightening torque without an exposed screwdriver slot.
• Thread up to close to the head, dimensions to ISO 7380-2.
• Made of plain black steel 10.9.

Applications

In jig construction the M 10 screw joins sheets and profiles wherever the 21.9 mm flange enlarges the bearing surface.

Standards and conformity

Head diameter 21.9 mm, head height 5.50 mm and hexagon socket 6 mm follow ISO 7380-2.