Male stud elbow coupling 10 S (M18x1.5), R 3/8", zinc-plated steel, no nut or cutting ring

This male stud elbow coupling turns a pipe run through 90 degrees at the male stud thread and seals it with the cutting ring. The data state a working pressure of 630 bar. The stated material is zinc-plated steel.

Benefits

• Tube diameter 10 S (M18x1.5) at male stud thread R 3/8".
• Working pressure 630 bar, heavy series.
• Temperature range -40 to +120 °C as per the data sheet.
• Material zinc-plated steel, the 90 degree turn saves an extra bend in the tube.
• When tightened the cutting ring bites into the tube and stays tight up to 630 bar.

Applications

At cylinders and pumps the joint stays tight over -40 to +120 °C.