Male stud elbow coupling 4 LL (M8x1), R 1/8", zinc-plated steel, no nut or cutting ring

As a male stud elbow coupling the article turns a pipe run through 90 degrees at the male stud thread and seals it with the cutting ring. Material zinc-plated steel is listed for this version. The article is listed with a working pressure of 100 bar.

Benefits

• Tube diameter 4 LL (M8x1) at male stud thread R 1/8".
• Working pressure 100 bar, very light series.
• Temperature range -40 to +120 °C as per the data sheet.
• Material zinc-plated steel, the 90 degree turn saves an extra bend in the tube.
• When tightened the cutting ring bites into the tube and stays tight up to 100 bar.

Applications

In machine building the turn saves space in front of the port at 100 bar.