Male stud elbow coupling 6 S (M14x1.5), R 1/4", zinc-plated steel, no nut or cutting ring

Once installed, the male stud elbow coupling turns a pipe run through 90 degrees at the male stud thread and seals it with the cutting ring. The data state a working pressure of 630 bar. Material zinc-plated steel is listed for this version.

Benefits

• Tube diameter 6 S (M14x1.5) at male stud thread R 1/4".
• Working pressure 630 bar, heavy series.
• Temperature range -40 to +120 °C as per the data sheet.
• Material zinc-plated steel, the 90 degree turn saves an extra bend in the tube.
• When tightened the cutting ring bites into the tube and stays tight up to 630 bar.

Applications

At cylinders and pumps the joint stays tight over -40 to +120 °C.