Stud connector, female and male thread, thread NPT 1/2", PN 210 bar, zinc plated steel

The stud connector connects pipework to the threaded port of a device. Zinc plated steel determines the load capacity and the corrosion behaviour. The joint is created via the male thread NPT 1/2". The nominal pressure is stated as 210 bar.

Benefits

• Steel takes the tightening torque on the NPT 1/2" thread without permanent deformation.
• The nominal pressure of 210 bar defines the load limit of the joint.
• The male thread NPT 1/2" fits the existing port without an adapter.
• The 60° cone provides a metal to metal seal and makes additional sealing compound unnecessary.
• 1 component connects device and line, an intermediate piece is not needed.

Applications

Connection of pumps, valves and cylinders, control blocks, hydraulic and lubrication lines. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.