Everis LQ2 non-spill coupling body, G1/8 male thread, chrome-plated brass, EPDM, red - CPC LQ2D3102RED

This red LQ2 coupling body makes the warm side of a cooling loop separable without coolant dripping onto electronics. CPC specifies less than 0.015 cc per disconnect at 0 psi and less than 0.063 cc at 200 psi. The G1/8 (BSPP) male thread screws directly into a manifold, cold plate or adapter.

Use in the data center

In direct-to-chip systems the coupling sits at the cold plate outlet or on the return line inside a server tray. Red identifies the warm line, while the blue counterpart marks the cold one. During service or a module swap only this joint is opened and the rest of the loop stays filled. The low profile fits densely populated chassis.

Benefits

• Uncouple under system pressure: The valve shuts as the halves separate, leaving less than 0.063 cc at 200 psi.
• Clear return marking: The red color shows at a glance which line carries heated coolant.
• Long-term sealing: Redundant multi-lobed EPDM seals add protection against leaks over extended service.
• Wide operating window: Rated from vacuum to 13.8 bar and from -17 to 115 °C.
• One-handed use: The thumb latch engages with an audible click.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis LQ2 series datasheet is available under Downloads.