Elastomer expansion joint, flange connection DN100-PN16 (DIN/EN), bellows in NBR

In use, the expansion joint takes up length change, lateral offset and angular deflection of the pipe run and damps structure-borne noise. The data also state a working pressure of 0 - 16 bar. This version comes with a face-to-face length of 150 mm and a flange outside diameter of 220 mm. In addition the data give the DN100-PN16 (DIN/EN) flange connection.

Benefits

• Nominal size DN 100 on flange connection DN100-PN16 (DIN/EN) at a working pressure of 0 - 16 bar.
• Axially the bellows takes 40 mm of compression and 10 mm of extension.
• Lateral offset up to 15 mm and angular deflection up to 15 degrees.
• Bellows in NBR with a synthetic fabric carrier, permitted up to max. +90 °C.
• Face-to-face length 150 mm at 20 mm flange thickness and 220 mm flange outside diameter.
• Steel flanges that turn on both sides make it easier to line up the hole patterns during installation.

Applications

In plant engineering the joint on connection DN100-PN16 (DIN/EN) takes up an offset of up to 15 mm.