Compact throttle valve, supply and exhaust metering, G 3/8", D 10 mm, nickel-plated brass

Where installation space is tight, every millimetre counts, and that is exactly where this compact throttle valve pays off with an installed height about 30 % lower than standard throttle check valves. As a supply and exhaust metering version it restricts the flow in both directions according to the position of the throttle screw. It is screwed in via G 3/8" and accepts a tube with an outside diameter of 10 mm. The permitted operating pressure spans -0,95 to 20 bar and the temperature range covers -20 to +80 °C.

Benefits

• Around 30 % lower installed height than a standard throttle check valve
• Metering in both directions, adjustable from -0,95 to 20 bar
• Adjustment without tools, then locked by pressing the cap
• Nickel-plated brass body with a PA 66 release ring
• Stainless steel gripping rings and NBR seal for -20 to +80 °C
• Manufactured with silicone-free seals and lubricants

Applications

• Speed setting inside crowded valve clusters
• Damping cylinder movement in both directions on fixtures
• Systems running at higher pressure levels up to 20 bar
• Use at low ambient temperatures down to -20 °C
• Machines where a setting once found has to stay locked