Combined air service unit, G 1", 0.5 - 6 bar, inlet 0 - 16 bar

In use, the combined air service unit combines filter, regulator and lubricator in one body and prepares the compressed air ahead of the consumer. It is supplied with a face-to-face length of 93 mm. It is produced from zinc die casting with NBR seals. In addition the data give the G 1" port, the plastic bowl and an inlet pressure of 0 - 16 bar.

Benefits

• Filter, regulator and lubricator in one unit with the G 1" port.
• Pressure control range 0.5 - 6 bar at an inlet pressure of 0 - 16 bar.
• Flow rate 50 - 3400 l/min in size 2.
• Filter pore size 40 µm, the oil reservoir sits inside the filter bowl.
• Condensate drain manual with a gauge reading 0 - 10 bar.
• Temperature range 0 to +50 °C as per the data sheet.

Applications

Ahead of cylinders and valve islands the unit with G 1" prepares the air and regulates it to 0.5 - 6 bar.