Piston rod-free cylinder ZRL1F, Ø 63, Stroke 100, Standard - Riegler 129689

Piston rod-free cylinder ZRL1F, Ø 63, Stroke 100, Standard, Working pressure 0,5 - 8 bar, Temp. -10 to 80 °C ZRL1F series actuators are characterized by the particularly flat piston design and include piston diameters of 16, 25, 32, 40, 50 and 63 mm with stroke lengths up to 5700 mm. Suitable for filtered (50 µm) and unlubricated or lubricated compressed air. Please ensure continuous oiling when using lubricated compressed air. Please refer to our type code in the data-sheet for the available variants and their corresponding type designations for your individual inquiry. Other special designs are also available on request. After receipt of order, the cylinders will be manufactured individually for you. Usually, shipment takes place within 5 working days, depending on the number of pieces. Freight and packaging costs are charged individually and regardless of the value of the goods.

Standards and origin

• Customs tariff number: 84123100
• Country of origin: DE

About Rodless cylinders

Rodless actuators move the load on a carriage running directly along the cylinder barrel. With no piston rod extending, the space required stays close to the installed length even at strokes up to 5140 mm. The 194 items cover piston diameters of 16 to 63 mm and work double-acting up to 8 bar.

What matters when choosing

• Set the stroke from the travel required, with 100 to 5140 mm available. On long axes, deflection and the maximum lateral load stated per item belong in the calculation.
• Piston diameter from 16 to 63 mm governs force and carriage stiffness. The force at 6 bar is listed per item as a cross-check.
• The series distinguishes the designs. ZRL1F uses a particularly flat piston layout, alongside ZRL1C, ZRL1S and the STD rodless series.
• Seal material is part of the speed calculation. Documented options are an oil-resistant plastic based on NBR, an NBR variant for speeds up to 1 m/s and a version with FPM.
• Check port size and minimum pressure. Ports run from M5 through G 1/8 and G 1/4 up to G 3/8, and working pressure starts at 0.5 to 1 bar depending on version.

Typical applications

• Handling axes with long travel on a small footprint
• Feeding and transferring parts along conveyor lines
• Opening and closing doors, slide gates and flaps
• Palletising and stacking motions in packaging equipment
• Traversing axes for test, measuring and marking heads

The housing is an anodised profile tube in aluminium alloy, the medium is stated as filtered compressed air down to 50 µm, and lubricated air has to be supplied continuously. The 194 items originate in Germany and Italy.