Classical V-belt DIN 2215, section Z 10x6, inside length 725 mm, datum length 747 mm

As a V-belt the article transmits the power between two pulleys through the flanks of its wedge section and takes up shocks elastically. The data sheet gives an inside length of 725 mm.

Benefits

• Inside length 725 mm at a datum length of 747 mm, both figures are given and need no conversion when replacing a belt.
• Section Z 10x6 to DIN 2215, so the belt fits every pulley of this section.
• Permitted up to a belt speed of 30 m/s.
• The smallest permitted pulley diameter is 45 mm.
• Usable from -40 to +80 °C.

Applications

On a compressor or a pump the belt with an inside length of 725 mm replaces the worn one without changing the centre distance.

Standards and conformity

Section and lengths follow DIN 2215. Designation Z28.5 gives the section and the inside length in inches.