Classical V-belt DIN 2215, section Z 10x6, inside length 2120 mm, datum length 2142 mm

The V-belt transmits the power between two pulleys through the flanks of its wedge section and takes up shocks elastically and follows DIN 2215. The data sheet gives an inside length of 2120 mm.

Benefits

• Inside length 2120 mm at a datum length of 2142 mm, both figures are given and need no conversion when replacing a belt.
• Section Z 10x6 to DIN 2215, so the belt fits every pulley of this section.
• Permitted up to a belt speed of 30 m/s.
• The smallest permitted pulley diameter is 45 mm.
• Usable from -40 to +80 °C.

Applications

On a compressor or a pump the belt with an inside length of 2120 mm replaces the worn one without changing the centre distance.

Standards and conformity

Section and lengths follow DIN 2215. Designation Z83.5 gives the section and the inside length in inches.