Cam lock dust cap type DC, brass, DN 15 mm, plug diameter 24.3 mm, PN 11 bar

Where a coupling stays open, the cam lock dust cap type DC keeps dirt and moisture away from the sealing face. The material used is brass. The component is rated for 11 bar nominal pressure. The nominal size is 15 mm.

Benefits

• The nominal pressure of 11 bar defines the load limit of the joint.
• Within the range of -10 to +80 °C the joint remains serviceable.
• At 15 mm the nominal size is defined in the data sheet and can be planned in advance.
• The 2 cam levers hold the cap on the plug without any tools.
• 1 cap protects the sealing face of the plug against dirt and mechanical damage.

Applications

Protection of open couplings on vessels, tankers and hose lines while they are idle. Brass is used in device engineering, in workshops and in water installation.