Check valve, tube 30 S (M42x2), G 1-1/4", zinc-plated steel without nut, flow thread to tube, 1 bar

In use, the check valve passes the medium in one direction only and blocks the opposite direction. The data also state a working pressure of 250 bar. Its rating is a cracking pressure of 1 bar. In addition the data give flow from the thread to the tube.

Benefits

• Cracking pressure 1 bar with a tolerance of about 20 percent.
• Working pressure up to 250 bar, rated as heavy series.
• Tube connection 30 S (M42x2) and stud thread G 1-1/4" in a single part.
• Flow from the thread to the tube at a working pressure of 250 bar.
• Material without nut and cutting ring, zinc-plated steel for a temperature range of -20 to +100 °C.

Applications

In pipework with the connection 30 S (M42x2) the valve is screwed straight into the thread G 1-1/4".

Standards and conformity

The working pressure of 250 bar applies to the heavy series.