Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pneumatic parallel gripper size 8, stroke per jaw 4 mm HPPF-8-8-A - Festo 8133724
With 27.22 N gripping force per jaw when closing at 6 bar, the parallel gripper HPPF-8-8-A holds prismatic and round parts. 4 mm stroke per jaw, repetition accuracy 0.03 mm, double-acting, ball guide. Runs on 1.5 to 7 bar via M3 port. Position detection with proximity switches.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
27.22 N gripping force per jaw when closing at 6 bar: that is what the size 8 parallel gripper HPPF-8-8-A provides. Both jaws move parallel towards each other. Version HPPF-8-8-A: double-acting, ball guide, rack and pinion, flat finger mounting.
Benefits
- 27.22 N gripping force per jaw when closing at 6 bar, total gripping force 54.44 N
- Repetition accuracy 0.03 mm
- 4 mm stroke per jaw, with max. 20 g per external gripper finger
- Closing time from 12 ms, opening time from 15 ms at 6 bar, operating frequency 2 Hz
- Corrosion resistance class CRC 0, ambient temperature -10 to 60 °C
Applications
Typical tasks for the HPPF-8-8-A are assembly, feeding and pick-and-place in automated systems, at -10 to 60 °C ambient temperature. Gripper fingers are mounted on the jaws, each external finger may weigh up to 20 g. Position detection with proximity switches. For battery production with reduced Cu/Zn/Ni values (F1a), the HPPF-8-8-A is a suitable choice. Shipping weight 0.08 kg.
Technical data
| Size | 8 |
|---|---|
| Total stroke | 8 mm |
| Stroke per gripper jaw | 4 mm |
| Max. angular gripper jaw backlash ax, ay | 0° |
| Max. gripper jaw backlash Sz | 0 mm |
| Repetition accuracy, gripper | 0.03 mm |
| Number of gripper jaws | 2 |
| Drive system | Pneumatic |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Gripper function | Parallel |
| Gripping force retention | None |
| Design | Flat mounting method for gripper fingers, Rack and pinion, Positively driven motion sequence |
| Guide | Ball guide |
| Position detection | Via proximity switch |
| Variants | Variant without copper, zinc or nickel as main constituent (except nickel in steel, chemically nickel-plated surfaces, PCBs, cables, connectors and coils) |
| Operating pressure | 1.5 to 7 bar |
| Max. operating frequency of gripper | 2 Hz |
| Min. opening time at 6 bar | 15 ms |
| Min. closing time at 6 bar | 12 ms |
| Max. mass per external gripper finger | 20 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating medium | Lubricated operation possible, after that always operate lubricated |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Ambient temperature | -10 to 60 °C |
| Total gripping force, opening at 6 bar | 54.44 N |
| Total gripping force, closing at 6 bar | 54.44 N |
| Gripping force per gripper jaw, opening at 6 bar | 27.22 N |
| Gripping force per gripper jaw, closing at 6 bar | 27.22 N |
| Max. force on gripper jaw Fz static | 60 N |
| Max. moment Mx | 0.9 Nm |
| Max. moment My | 0.4 Nm |
| Max. moment Mz | 0.4 Nm |
| Product weight | 68 g |
| Type of mounting | Direct mounting via through-hole, Direct mounting via thread |
| Pneumatic connection | M3 |
| Note on materials | RoHS compliant |
| Cover cap material | Wrought aluminium alloy, anodised |
| Cover material | Anodised wrought aluminium alloy |
| End plate material | High-alloy stainless steel |
| Housing material | Anodised wrought aluminium alloy |
| Gripper jaw material | High-alloy steel |
| Piston seal material | TPE-U(PU) |
| O-ring material | NBR |
| Screw material | Coated steel |
| Gear rack material | High-alloy stainless steel |
| Weight | 0.075 kg |
| Manufacturer | Festo |
| Hersteller-Nr | HPPF-8-8-A |
| EAN | 4052568586164 |
| Zolltarifnummer | 84798997 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | M3 |
| Medium | Compressed air |
| Function | double-acting |
| Actuation type | pneumatic |
| Betriebsdruck max [bar] | 7 |
| Temperaturbereich | -10-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







