Images are examples, some edited with AI. The technical data are authoritative. AI notice
Parallel gripper HPPF-20-40-A - Festo 8143408
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Size | 20 |
|---|---|
| Total stroke | 40 mm |
| Stroke per gripper jaws | 20 mm |
| Max. angular gripper jaw backlash ax, ay | 0 deg |
| Max. gripper jaw backlash Sz | 0 mm |
| Repetition accuracy, gripper | 0.06 mm |
| Number of gripper jaws | 2 |
| Drive system | Pneumatic |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Gripper function | Parallel |
| Gripper force back-up | None |
| Design | Flat mounting method for gripper fingers, Rack and pinion, Force pilot operated motion sequence |
| Guide | Ball guide |
| Position detection | Via proximity switch |
| Variants | Metals with copper, zinc or nickel by mass as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. |
| Operating pressure | 1 ... 7 bar |
| Max. operating frequency of gripper | 1 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 120 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 110 ms |
| Max. mass per external gripper finger | 625 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Ambient temperature | -10 ... 60 °C |
| Total gripping force, opening, 0.6MPa (6bar, 87 psi) | 346.6 N |
| Total gripping force, closing, 0.6MPa (6bar, 87 psi) | 346.6 N |
| Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) | 173.3 N |
| Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) | 173.3 N |
| Max. force on gripper jaw Fz static | 320 N |
| Max. moment Mx | 6 Nm |
| Max. moment My | 3 Nm |
| Max. moment Mz | 3 Nm |
| Product weight | 887 g |
| Type of mounting | Direct mounting via through-hole, Direct mounting via thread |
| Pneumatic connection | M5 |
| Note on materials | RoHS compliant |
| Material cover cap | Wrought aluminium alloy, anodised |
| Material cover | Anodised wrought aluminium alloy |
| Material end plate | High-alloy stainless steel |
| Material housing | Anodised wrought aluminium alloy |
| Material gripper jaws | High-alloy steel |
| Material piston seal | TPE-U(PU) |
| Material o-ring | NBR |
| Material screws | Coated steel |
| Gear rack material | High-alloy stainless steel |
| Weight | 0.9 kg |
| Manufacturer | Festo |
| Hersteller-Nr | HPPF-20-40-A |
| EAN | 4052568586348 |
| Zolltarifnummer | 84798997 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
