High pressure elbow swivel joint, male stud thread G 3/4", DN 16 mm, PN 250 bar, zinc plated steel

The high pressure elbow swivel joint transfers the medium between a fixed and a rotating component. Zinc plated steel determines the load capacity and the corrosion behaviour. The joint is created via the male stud thread G 3/4". The nominal pressure is stated as 250 bar.

Benefits

• Alignment takes place after screwing in, which saves 1 additional angle piece.
• Steel takes the tightening torque on the G 3/4" thread without permanent deformation.
• The nominal pressure of 250 bar defines the load limit of the joint.
• The male stud thread G 3/4" fits the existing port without an adapter.
• At 16 mm the nominal size is defined in the data sheet and can be planned in advance.
• The rotatable connection prevents the line from twisting over a full 360 degrees.

Applications

Rotatable connections on drums and shafts, swivel arms, hose reels and moving tools. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.