High pressure tee fitting, thread G 1/8", PN 350 bar, zinc plated steel

Where a branch is needed, the high pressure tee fitting takes over the distribution to the outlets. Zinc plated steel determines the load capacity and the corrosion behaviour. The joint is created via the thread G 1/8". The component is rated for 350 bar nominal pressure.

Benefits

• The nominal pressure of 350 bar defines the load limit of the joint.
• The thread G 1/8" fits the existing port without an adapter.
• 3 ports in one component replace two separate fittings and an intermediate line.
• The branch sits at 90° to the through axis and keeps the flow deflection short.
• Steel takes the tightening torque on the G 1/8" thread without permanent deformation.

Applications

Branches and measuring points, distribution to secondary runs, return lines. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.