High pressure socket, thread G 1/4", PN 250 bar, zinc plated steel, for pipe connections

Within the line the high pressure socket creates the transition between two connections. The material used is zinc plated steel. The thread G 1/4" accepts the mating part. The nominal pressure is 250 bar.

Benefits

• Both sides carry a thread, so 1 component replaces two separate transition pieces.
• The bore runs through and does not narrow the cross section at either of the 2 connection sides.
• Steel takes the tightening torque on the G 1/4" thread without permanent deformation.
• The nominal pressure of 250 bar defines the load limit of the joint.

Applications

Pipework construction, extension of existing runs, connection of valves. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.