High pressure socket, thread G 1", PN 160 bar, zinc plated steel, for pipe connections

This high pressure socket connects two threaded ends to each other without any further intermediate piece. The material used is zinc plated steel. The thread G 1" accepts the mating part. The component is rated for 160 bar nominal pressure.

Benefits

• The thread G 1" fits the existing port without an adapter.
• Both sides carry a thread, so 1 component replaces two separate transition pieces.
• The bore runs through and does not narrow the cross section at either of the 2 connection sides.
• Steel takes the tightening torque on the G 1" thread without permanent deformation.
• The nominal pressure of 160 bar defines the load limit of the joint.

Applications

Pipework construction, extension of existing runs, connection of valves. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.