High pressure socket, thread G 1/2", PN 225 bar, zinc plated steel, for pipe connections

The high pressure socket joins two line ends of the same or of different thread size into one tight run. Zinc plated steel determines the load capacity and the corrosion behaviour. The joint is created via the thread G 1/2". The nominal pressure is stated as 225 bar.

Benefits

• Steel takes the tightening torque on the G 1/2" thread without permanent deformation.
• The nominal pressure of 225 bar defines the load limit of the joint.
• The thread G 1/2" fits the existing port without an adapter.
• Both sides carry a thread, so 1 component replaces two separate transition pieces.
• The bore runs through and does not narrow the cross section at either of the 2 connection sides.

Applications

Pipework construction, extension of existing runs, connection of valves. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.