High pressure elbow swivel stud fitting, male stud thread G 3/4", DN 16 mm, -20 bis +120

Where a line has to follow a rotary movement, the high pressure elbow swivel stud fitting prevents the hose from twisting. The material used is 1.4404 (NC). The male stud thread G 3/4" accepts the mating part. The operating pressure is stated as 160 bar.

Benefits

• Alignment takes place after screwing in, which saves 1 additional angle piece.
• The operating pressure of 160 bar defines the load limit of the joint.
• The male stud thread G 3/4" fits the existing port without an adapter.
• Within the range of -20 to +120 °C the joint remains serviceable.
• At 16 mm the nominal size is defined in the data sheet and can be planned in advance.
• The rotatable connection prevents the line from twisting over a full 360 degrees.

Applications

Rotatable connections on drums and shafts, swivel arms, hose reels and moving tools. The selection follows the existing port and the operating load of the system.