High pressure elbow swivel stud fitting, male stud thread G 3/4", DN 16 mm, -20 bis +120

The high pressure elbow swivel stud fitting transfers the medium between a fixed and a rotating component. Stainless steel 1.4404 determines the load capacity and the corrosion behaviour. The joint is created via the male stud thread G 3/4". The operating pressure is stated as 250 bar.

Benefits

• The rotatable connection prevents the line from twisting over a full 360 degrees.
• Alignment takes place after screwing in, which saves 1 additional angle piece.
• Stainless steel 1.4404 stays dimensionally stable on the G 3/4" thread even after repeated cleaning and keeps its sealing effect.
• The operating pressure of 250 bar defines the load limit of the joint.
• The male stud thread G 3/4" fits the existing port without an adapter.
• Within the range of -20 to +120 °C the joint remains serviceable.

Applications

Rotatable connections on drums and shafts, swivel arms, hose reels and moving tools. The stainless material allows use in food, chemical and process equipment engineering.