High pressure elbow swivel stud fitting, male stud thread G 1/2", DN 13 mm, zinc plated steel, 160

The high pressure elbow swivel stud fitting transfers the medium between a fixed and a rotating component. Zinc plated steel determines the load capacity and the corrosion behaviour. The joint is created via the male stud thread G 1/2". The operating pressure is stated as 160 bar.

Benefits

• The rotatable connection prevents the line from twisting over a full 360 degrees.
• Alignment takes place after screwing in, which saves 1 additional angle piece.
• Steel takes the tightening torque on the G 1/2" thread without permanent deformation.
• The operating pressure of 160 bar defines the load limit of the joint.
• The male stud thread G 1/2" fits the existing port without an adapter.
• Within the range of -20 to +100 °C the joint remains serviceable.

Applications

Rotatable connections on drums and shafts, swivel arms, hose reels and moving tools. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.