Thread extension, male thread NPT 1/2", PN 210 bar, zinc plated steel

The thread extension joins two line ends of the same or of different thread size into one tight run. Zinc plated steel determines the load capacity and the corrosion behaviour. The joint is created via the male thread NPT 1/2". The nominal pressure is stated as 210 bar.

Benefits

• Steel takes the tightening torque on the NPT 1/2" thread without permanent deformation.
• The nominal pressure of 210 bar defines the load limit of the joint.
• The male thread NPT 1/2" fits the existing port without an adapter.
• Both sides carry a thread, so 1 component replaces two separate transition pieces.
• The bore runs through and does not narrow the cross section at either of the 2 connection sides.

Applications

Pipework construction, extension of existing runs, connection of valves. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.