Hose tail with internal cone, thread M 3, hose 2 mm, stainless steel 1.4571

Once installed, the hose tail connects a hose over its barbed shank to a cylindrical threaded port. In addition the sheet lists a hose diameter of 2 mm. Decisive for the selection is a nominal pressure range of -1 to 40 bar.

Benefits

• The nominal pressure range of -1 to 40 bar covers vacuum and positive pressure in one tail.
• The cylindrical thread M 3 with its internal cone seals on the cone seat of the mating part.
• The barbed shank is matched to a hose inside diameter of 2 mm.
• An across flats size of 4.5 mm allows tightening with an ordinary open-ended spanner.
• Made of stainless steel 1.4571.

Applications

In compressed air and water lines the tail connects a hose of 2 mm inside diameter to a M 3 thread.