Threaded hose nozzle with parallel thread, G 3/8", hose 10 mm, PVDF (natural)

Once installed, the threaded hose nozzle takes a hose over a barbed nozzle to a parallel pipe thread and holds it there with a clamp. This version is listed with thread G 3/8" and hose connection 10 mm. Its rating is a hose inside diameter of 10 mm.

Benefits

• Parallel thread G 3/8" and hose connection 10 mm in one part, so no adapter is needed.
• Width across flats 22 mm, so the nozzle can be tightened with an ordinary open-ended spanner.
• Material PVDF (natural), FDA compliant and resistant to chemicals at a low weight.
• Temperature range -20 to +120 °C for this material.
• Nominal pressure PN 10.

Applications

On tanks and filters the nozzle is screwed in over its 22 mm flats and the hose follows with a clamp.

Standards and conformity

Thread G 3/8" is parallel and therefore seals through a flat gasket and not through the thread itself.