Hose tail with internal cone, thread G 1/2", hose 10 mm, nickel-plated brass

The hose tail connects a hose over its barbed shank to a cylindrical threaded port. In addition the sheet lists a hose diameter of 10 mm. Its rating is a nominal pressure range of -1 to 16 bar.

Benefits

• The nominal pressure range of -1 to 16 bar covers vacuum and positive pressure in one tail.
• The cylindrical thread G 1/2" with its internal cone seals on the cone seat of the mating part.
• The barbed shank is matched to a hose inside diameter of 10 mm.
• An across flats size of 24 mm allows tightening with an ordinary open-ended spanner.
• Made of nickel-plated brass.

Applications

In plant construction the nickel-plated brass tail is screwed in with a spanner over its 24 mm across flats.