Straight connector with 60° cone, with 60° cone, union nut with 60° male cone G 1/8", Stahl verzinkt

Where a line is led to a pump, valve or cylinder, the straight connector with 60° cone sits directly in the port. Zinc plated steel determines the load capacity and the corrosion behaviour. The joint is created via the union nut with 60° male cone G 1/8". The component is rated for 575 bar nominal pressure.

Benefits

• The nominal pressure of 575 bar defines the load limit of the joint.
• The union nut with 60° male cone G 1/8" fits the existing port without an adapter.
• The 60° cone provides a metal to metal seal and makes additional sealing compound unnecessary.
• 1 component connects device and line, an intermediate piece is not needed.
• Steel takes the tightening torque on the G 1/8" thread without permanent deformation.

Applications

Connection of pumps, valves and cylinders, control blocks, hydraulic and lubrication lines. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.