Push-in fitting, straight design, with EPDM seal, male thread R 1/2", tube 10 mm, POM, FDA compliant

The push-in fitting connects the male thread R 1/2" and a tube of 10 mm outside diameter. The operating pressure reaches from -0.95 bar to 11 bar. The straight design carries the medium through the part without deflection.

Benefits

• The connection over male thread R 1/2" is fixed in size and needs no adaptor
• With tube diameter 10 mm the size is fixed, so no reworking of the line is required
• The operating pressure from -0.95 bar to 11 bar is released for this size
• POM, FDA compliant keeps the parts light and dimensionally stable in the range from -0.95 bar to 11 bar

Applications

Compressed air installation on machines and plants, water and cooling circuits, pneumatic cylinders and valve terminals, control air lines inside the control cabinet.

Standards and conformity

The following approvals are documented for the materials used: FDA 21 CFR 177.2600, FDA 21 CFR 177.2470, NSF and ANSI 51 as well as 61.